Setting IP addresses on 2950 switches

[pctechnician]

How would you set ip addresses on cisco 2950 switches. What i want to do is save my configs from my 2950 switch to my tftp server.

if anyone knows how i would set the ip address, and then save to the tftp server, please help.

A+,Net+

 

[eurobadger]

Hi

Give the default VLAN on your switch an IP address. The ports in that VLAN (all of them by default where no others have been configured) will allow you then to connect to that address.

Something like:
Switch>enable
Switch#conf t
Switch(Config)#int vlan 1
Switch(Config-if)#ip address 10.1.1.1 255.0.0.0
Switch(Config-if)#no shut
Switch(Config-if)#<ctrl-Z>
Switch#

Cisco have the command ref in case I have got the syntax wrong at

http://www.cisco.com/en/US/products...s_command_reference_book09186a0080150b64.html

EB

 

[l1carter]

EB is correct.

If you want save config to tftp server once done

copy running-config tftp

enter your tftp server ip address and config file name and away you go.