lpmartineau
Technical User
Hello everyone,
the machine:
IBM netfinity 7000 M10
1x 18.2 gig SCSI 10k rpm drive (main O/S drive)
3x 9.1 gig SCSI 10k rpm drive (not in use)
here is the problem. somehow when I set things up the first time with only the 18.2 gig ibm I managed to set it up so the 18.2 is Array C. I want to set up my 3 9.1 gigs i na RAID 5 but when I do it creates Array A with Array A and C it try's to boot to array A and will not boot at all becuase those drives oviously don't contain anything yet. if I remove the Array it boots into Array C just fine.
is there a way to change the 18.2 from ARray C to Array A without loosing any data?
thank you very much
have a great day
Luc
the machine:
IBM netfinity 7000 M10
1x 18.2 gig SCSI 10k rpm drive (main O/S drive)
3x 9.1 gig SCSI 10k rpm drive (not in use)
here is the problem. somehow when I set things up the first time with only the 18.2 gig ibm I managed to set it up so the 18.2 is Array C. I want to set up my 3 9.1 gigs i na RAID 5 but when I do it creates Array A with Array A and C it try's to boot to array A and will not boot at all becuase those drives oviously don't contain anything yet. if I remove the Array it boots into Array C just fine.
is there a way to change the 18.2 from ARray C to Array A without loosing any data?
thank you very much
have a great day
Luc