Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ServeRAID 6M - Windows 2003 - Disks re-synch ALWAYS on failover...
- Thread starter iPhone
- Start date
- Thread starter
- #21
Yes, I moved the Quorum from its own Group and into the Cluster Group.
I have also set the nodes as 6, 7 respectively. When I did this in the Support CD ServeRAID application then verified it from the BIOS SCSI adapter view.
The SCCI IDs from BIOS View look all unique and where they should be: 0,1,2,3,4 then 6,7 then 15 for the EXP400.
--
I have not removed SCSI Disk Scan from the boot sequence. I will do this tormorrow.
--
Thankyou for your thoughts today!
John
I have also set the nodes as 6, 7 respectively. When I did this in the Support CD ServeRAID application then verified it from the BIOS SCSI adapter view.
The SCCI IDs from BIOS View look all unique and where they should be: 0,1,2,3,4 then 6,7 then 15 for the EXP400.
--
I have not removed SCSI Disk Scan from the boot sequence. I will do this tormorrow.
--
Thankyou for your thoughts today!
John
- Status
