SERVER WARNING PLAT-ALM

[Montero84]

Hello,

I entered the command "display alarms" and then I can see a warning that says.. [ SERVER WARNING PLAT-ALM ... ] what do that means?

Thanks in advance!

 

[DontDeleteMeAgain]

you need to log into the web interface for the 87XX

 

[inerguard]

once in the web interface, left hand side will show alarms and give you the option to clear them.

Before you do this though, i'd do the command

"test alarm sh cl"

This will remove any outdated alarms from CM. If they are still there then log into the web browser for the 87xx


[Started on Version 3 software 15 years a go]

 

[Montero84]

Hello,

Thank you for the reply. I have a S8400 Server.. when I try to enter "test alarm sh cl" the command doesn work.. then i try entering "test and then selected "help" then is only shows me the option "firmware", then I can only use "test firmware"... why does my system doesn't have the option "alarm" to be use after the command "test"...

Thanks!

 

[DontDeleteMeAgain]

that means your login does not have maint permissions