rwhall51
IS-IT--Management
- Oct 30, 2001
- 114
I just added 3 more gigs or RAM to my 2003 serve. The bios shows the total 5 gigs but windows only sees 3.5GB. Is this a known problem? I can't find anything about it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Server properteis shows wrong memoy
- Thread starter rwhall51
- Start date
- Status
ChicagoTechNet
MIS
quoted from
Can’t see the RAM more than 4GB
1. Windows 2000/2003 Standard server supports 4GB RAM only.
2. If you have Windows Advanced/Enterprise and Datacenter servers, you may need to add /3GB or /PAE switch on boot.ini file.
Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at
Can’t see the RAM more than 4GB
1. Windows 2000/2003 Standard server supports 4GB RAM only.
2. If you have Windows Advanced/Enterprise and Datacenter servers, you may need to add /3GB or /PAE switch on boot.ini file.
Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at
- Status
Similar threads
- Locked
- Question
- Locked
- Question