Server name wrong

[tschafer]

Hello to all,
We're having a problem with "Remote Insight Firmware Version: 1.03 ". It seems We are getting the wrong server name in the Remote Insight Status Summary. We get the name of another system on the network. I guess what we really need to know is were does Insight gets the server name?
Any help would be appreciated.
TIA,
Ted Schafer

 

[willir]

Ted

Are you monitoring an IP or IPX device?

My experience for CIM 3.x to 5.x has been that CIM will use the correct server name for IPX. For IP, it uses the name entered when setting up the device.

Also, is it possible that some one setup the other device with CIM agents? You will see the modules loaded on the server if you can access the device locally.

I have not used remote hardware tools.

Try deleting the object and re-discoverying it.

Richard