I have a server edition 9.0.4 with 3 remote 500V2s. On the 500V2s I have external paging connected to a C0 port then a UTI. Instructions say set up CO for loop, give trunk line group ID, create short code as *xx, dial, line group ID. I can do that on the remote 500s. I wanted to have a "Shared" short code that could be used across the whole SCN. When attempting to build the short code on the Server, there is no "dial" by itself. I can't reboot this to do testing until Monday. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Server Edition Paging
- Thread starter fonedude
- Start date
Similar threads
