Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Serial Interface
- Thread starter gutiej01
- Start date
robertjo24
MIS
This means that the serial interface s0/1 is in shut down condition.
To activate the interface:
config term
int s0/1
no shut
exit
exit
If the interface is configured, and connected, the show interface command will show serial0/1 is up, line protocol is up.
To activate the interface:
config term
int s0/1
no shut
exit
exit
If the interface is configured, and connected, the show interface command will show serial0/1 is up, line protocol is up.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question