My problem is that starting back at Quark 5 when printing separations to my imagesetter a heidelberg/hell Delta 5.5 the c,m,&y seps from page one end up on page one and the k sep creates a new page 2 with the k sep on it all by itselfs. While it does image correctly it effectively kills the trapping software ability to trap the file since all the plates are not on the same "page". I know other people out there have had this problem and wonder if they have found a fix.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
separations from quark 5 or 6 print to 2 different "pages" on imageset
- Thread starter dabob
- Start date
Similar threads
- Locked
- Question