Send SCSI Command Failed on TLZ04 Tape Drive

[drencep]

Hi,

I'm getting this message logged on "errlog.sys" whenever I mount and do backup/ver on my tape drive. Does anybody know what it means?

Thanks in advance!




**** V3.4 ********************* ENTRY 3167 ********************************


Logging OS 1. OpenVMS
System Architecture 2. Alpha
OS version V7.3-1
Event sequence number 28826.
Timestamp of occurrence 11-MAR-2004 09:20:33
Time since reboot 0 Day(s) 0:08:16
Host name ORBIT

System Model DEC 3000 - M600

Entry Type 1. Device Error


---- Device Profile ----
Unit ORBIT$MKD3
Product Name TLZ04

-- Driver Supplied Info -
Device Firmware Revision 1615
VMS SCSI Error Type 3. Send SCSI Command Failed
SCSI ID x00
SCSI LUN x00
SCSI SUBLUN x00
Port Status x00000001 NORMAL - normal successful completion
SCSI Command Opcode x34 Read Position
Command Data
x00
x00
x00
x00
x00
x00
x00
x00
x00

SCSI Status x02 Check Condition

----- Software Info -----
UCB$x_ERTCNT 16. Retries Remaining
UCB$x_ERTMAX 16. Retries Allowable
IRP$Q_IOSB x0000000000000000
UCB$x_STS x00000110 Online
Busy
IRP$L_PID x00010037 Requestor "PID"
IRP$x_BOFF 0. Byte Page Offset
IRP$x_BCNT 0. Transfer Size In Byte(s)
UCB$x_ERRCNT 1. Errors This Unit
UCB$L_OPCNT 20. QIO's This Unit
ORB$L_OWNER x00010004 Owners UIC
UCB$L_DEVCHAR1 x0CC44438 Directory Structured
Single Directory
"Sequential Block" Oriented
File Oriented
Available
Error Logging
Allocated
Capable of Input
Capable of Output