We have a 2040 and we have been provided with two separate IP blocks from our ISP. After following the instruction on how to setup the second block to be accepted on our X1 interface, we were able to utilize those IP's.
The problem now is that for some reason when we try to connect with an IP from the second block the connection does not go through. in fact there is no entry entry in the log for the attempted connection.
To resolve this we need to login to the sonicwall, simply open one of the NAT policies, clicking on configure for the entry and press o.k. and all seems to work.
Any idea what the problem might be?
The problem now is that for some reason when we try to connect with an IP from the second block the connection does not go through. in fact there is no entry entry in the log for the attempted connection.
To resolve this we need to login to the sonicwall, simply open one of the NAT policies, clicking on configure for the entry and press o.k. and all seems to work.
Any idea what the problem might be?