SDM with non XM 2621 Router?

[octavian10]

Hello,
Does anyone out there know if SDM V2.2 will work with a 2621 non XM router. None of Cisco's documentation mentions if it will work with this older model. I have 12.3 (1a) IOS on this router. Thanks for the help.

Octavian

"I hear and I forget. I see and I remember. I do and I understand."
- Confucius (551 BC - 479)

 

[JOAMON]

Don't see that one in the list. You could always try and see if it will deploy and operate. I have a feeling though that if the router is not a supported model it will not even let you install the SDM files to the router.

 

[octavian10]

It will not let me insatll it on the router, but I just installed SDM on a PC and I will try to configure it without writing SDM to the routers memory. When you first run the SDM installation it asks if want to install on PC, router, or both, and according to SDM's documantation you do not need to install it on the router to be able to conigure it. Only one way to find out.
Thanks for the response.
Octavian

"I hear and I forget. I see and I remember. I do and I understand."
- Confucius (551 BC - 479)

 

[JOAMON]

What you could also try is to TFTP the files to the routers flash and then try it.
I have a 2811 with SDM and the flash looks as follows:


1 19233572 Sep 28 2005 15:17:24 -08:00 c2800nm-advsecurityk9-mz.124-3.bin
2 1038 Sep 29 2005 10:14:44 -08:00 home.shtml
3 1646 Sep 29 2005 10:14:48 -08:00 sdmconfig-2811.cfg
4 113152 Sep 29 2005 10:14:54 -08:00 home.tar
5 511939 Sep 29 2005 10:15:00 -08:00 128MB.sdf
6 1007616 Sep 29 2005 10:15:08 -08:00 common.tar
7 4052480 Sep 29 2005 10:15:30 -08:00 sdm.tar
8 812032 Sep 29 2005 10:15:46 -08:00 es.tar
All but the first I beleive are SDM related