Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Screen Area?

Status
Not open for further replies.
It’s possible, but it requires some strategy. First of all, does your page use layers, or just tables?
 
I use Layers No tables
 
I strongly recommend that you study this tutorial: This was the big turnaround for me. Once you build a basic page layout with flexible tables, you can add layers, which float over the top and snap to a specified position relative to an object in the table. This is the ‘snap layer’ behavior available from and it’s the best thing since sliced bread. As an example, on my homepage, the text in the upper right corner is an image in a table cell. The table width is set to 95%, so no matter what the screen size that text is up in the top right corner. The three-button menu, however, is in a layer which snaps to a position below and to the left of the upper right text when the page loads or is re-sized.
I hope this gets you started, and if you need help with details let me know.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top