Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCO Openserver 5.06
- Thread starter abovebrd
- Start date
Hi Danny
We have recently set up a 5.0.6 system which is running Throughbred software.There is definitely one difference and that is the console screen attributes for say scoansi are different. In addition we have been running some old binaries going back to Intel 310 xenix days which run quite happily on 5.0.5 but don't on 5.0.6.
I suspect there has been some convergence with unixware 7 where the above is also true.
Regards
Roy Thomas
We have recently set up a 5.0.6 system which is running Throughbred software.There is definitely one difference and that is the console screen attributes for say scoansi are different. In addition we have been running some old binaries going back to Intel 310 xenix days which run quite happily on 5.0.5 but don't on 5.0.6.
I suspect there has been some convergence with unixware 7 where the above is also true.
Regards
Roy Thomas
I have not noticed any significant changes to 5.0.6, other than additional hardware support. I have just recently installed it, so I have not gone over everything yet. I would say to stay at 5.0.5 if everything is running ok. I think it is just another way for SCO to make some more money. For the most part, they should have just put out a patch
~brye
~brye
- Status