SCN non-discoverable IP Office

[BigEDw]

I have 2 IP offices 500 V2 with 6.1.12 software. I have them in a SCN over the customers VPN the H323 line is up the SCN is up and I can 4 digit dial between the 2 systems.
But when I open Manager to Select IP Office I get the yellow triangle next to the SCN with the message “This SCN has some non-discoverable IP Office Systems”
What did I miss? Why can’t I see both systems in Manager?
I could not find any help in the knowledge base or the FAQ

 

[SupportDude]

1.Select File | Preferences.
2. Select the Discovery tab.
3. Select the SCN Discovery option.
4. Check that the other discovery setting are sufficient to discover all the systems in the SCN.
5.Click OK.

-SD-

http://www.mysupportguy.net

 

[BigEDw]

Thanks SupportDude. I did all that already. But I think I'm figuring it out. I need to build another IP route.

 

[tlpeter]

You can use:

0.0.0.0
0.0.0.0
gateway ipaddress

This way everything will be send to the gateway if there is no better match.


BAZINGA!

I'm not insane, my mother had me tested!