telecotek1
Vendor
is it possible to have an SCN between these releases? I can build the trunk and force calls across the trunk but no SCN. I know it's long shot just figured id ask.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCN 8.0 to 11.0?
- Thread starter telecotek1
- Start date
- Status
- Thread starter
- #3
telecotek1
Vendor
No the SCN wont come up the trunk only works bidirectionally if the service types are set to none.
if only working bidirectionally you have a network configuration issue.
this could be a reason why SCN does not come up but a previously stated it is an unsupported configuration even if you do get it to work
Do things on the cheap & it will cost you dear
this could be a reason why SCN does not come up but a previously stated it is an unsupported configuration even if you do get it to work
Do things on the cheap & it will cost you dear
- Status
Similar threads
- Question
