Dec 29, 2000 #1 Phlatts IS-IT--Management Oct 5, 2000 2 CA I have a 2503 and a 2610 router and will like to connect them using a DCE and DTE cables would like to see a sample config.
I have a 2503 and a 2610 router and will like to connect them using a DCE and DTE cables would like to see a sample config.
Dec 29, 2000 #2 wybnormal Technical User Apr 8, 2000 2,170 US 2514 S0 ! interface Serial0 ip address 192.1.3.5 255.255.255.0 no fair-queue clockrate 56000 no cdp enable ! 2503 S1 interface Serial1 ip address 192.1.3.6 255.255.255.0 no fair-queue no ddp enable HDLC is the default encapsulation so you do not need to specify it keep clock rate at 56000 clocking only on DCE router port Mike S Upvote 0 Downvote
2514 S0 ! interface Serial0 ip address 192.1.3.5 255.255.255.0 no fair-queue clockrate 56000 no cdp enable ! 2503 S1 interface Serial1 ip address 192.1.3.6 255.255.255.0 no fair-queue no ddp enable HDLC is the default encapsulation so you do not need to specify it keep clock rate at 56000 clocking only on DCE router port Mike S