Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sales group vectoring

Status
Not open for further replies.

jcp001

MIS
Aug 26, 2001
33
US
I have a couple of questions regarding the routing of calls going to my sales groups using a G3siR9. This is a new project. My goal is to have the calls try each station and then terminate to a generic voicemail box. The problem I am having is that the call rings only one station and does not try the next station or cover to voicemail. If all station are busy then it will cover to voicemail. Here is what I have setup:

Voicemail for x2589

Hunt group Group Number: 10 ACD? n
Group Name: Accounts payable Queue? n
Group Extension: 2589 Vector? y
Group Type: ucd-mia
TN: 1
COR: 1 MM Early Answer? n
Security Code:
ISDN Caller Display:
(With two members)

VECTOR DIRECTORY NUMBER
Extension: 2793
Name: Accounts Payable
Vector Number: 93
Allow VDN Override? n
COR: 1
TN: 1
Measured: none

VDN of Origin Annc. Extension:
1st Skill:
2nd Skill:
3rd Skill:

CALL VECTOR
Number: 93 Name: Accounts payabl
Lock? n
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? n
Prompting? y LAI? n G3V4 Adv Route? y CINFO? y BSR? y Holidays? y

01 wait-time 0 secs hearing silence
02 queue-to skill 10 pri l
03 wait-time 30 secs hearing music
04 messaging skill 11 for extension 2589
05 stop
06
07
08
09
10
11
 
If it were me setting this up I'd get rid of the hunt and vector altogether. Set up your ext. as an X-port with a coverage path immediately going to a coverage-answer-group which rings all the sales phones at the same time give it forwarding Busy/DA to your voice mail system after however many rings you feel appropriate and then start thinking about how and where you want your message waiting indicator to work.
 
What's the RONA (Redirect On No Answer) settings for the above? Could be worth playing with.
JDE
 
I would set up a hunt group with all the members in it. and put the coverage on the hunt group. I would use circular hunt or something of that nature. José

Please let me know if this was helpful

 
I would spend some time finding out about Hunt-to-station if I was you, that's been designed for this, I'm not sure about the voice mail though.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top