S8700 Web Interface Problem

[mwooks]

I have S8700 running CM2.2 - 111.4 with patch updated. But there's a problem accessing the web interface I cannot go through the server.

Thanks,

mwooks

 

[sjforcum]

When you type

https://address

of your active server it shows page cannot be displayed?

What about going through the services port?

 

[Arklite]

Can you telnet to the server address using Port 80?

 

[mwooks]

I connect directly to the service port but still getting an error logging into the web interface. I also tried telnet on port 80 but failed to connect. With my two servers only the standby server which I can access the web browser. I performed system interchange but still no good result.

 

[petran]

After the interchange, did the problem remain to the same server?

Try powering off the server and power on again. I have seen this before and sometimes this fixes the problem. If not, try re-formating the harddrive and install the software from scratch. If that does not solve the problem, replace the server.

Petran.