S8700 w G700 at far end alarming ?

[phoneuser]

We have a setup with an S8700 and 5 G700 at the far ends
through point to point data T1's ....all is working fine
My question is on the ALARM outcalling :

at the S8700 we can do the TEST INADS command but what is the command from the G700 end as we have modems at all
G700 for diagnostic reasons if needed .....

oss option in G700 :
is told to call our alarm tracking software but I do
not see a "TesT" command we logging into G700 local

I know that the S8700 calls out when the G700 goes into
LSP mode and works like a charm

We are able to dial into the G700 with a line sharing
device using the fax line to save $$$$$$ but just would
feel better if I know the OUTCALL option is fine as well

Phoneuser

 

[phoneuser]

I ended up double checking the inads / oss option its told to use the first number only and to use abbr notifiction ....
I did a reset system 4 from the command prompt ....they only have 2 pots trunks and all IP Phones which are registered to the S8700 .....so the end result was that I did hear it call out and it did page me with the Product
ID of the correct site ....yeah !

Phoneuser