S8500 can't change signaling to robbed bit T1 CAS

[3000gt]

We have an S8500 with Com Manager 3.0. We have a TN 464F installed and it used to be programmed as robbed bit signaling, B8ZS, and ESF. However we had to move the card, now that we are trying to return it,when implementing the ADD DS1 command, whenever we put in "robbed bit" and hit enter, it seems to take. However when you display the DS! it shows common channel, it will not take any other setting?

Anyone else see a similar issue and resolve it, any ideas?

Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs

 

[AvayaTier3]

cm software version?

R013x.00.0.340.3 CM 3.0.0
R013x.00.1.346.0 CM 3.0.1
R013x.01.0.628.6 CM 3.1.0
R013x.01.1.628.7 CM 3.1.1
R013x.01.2.632.1 CM 3.1.2
R013x.01.3.640.2 CM 3.1.3
R013x.01.4.642.1 CM 3.1.4
R013x.01.5.642.3 CM 3.1.5

That sounds like a bug

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com