s8300 telnet commands????

[Vmail]

This is a stupid question, but here goes....

I am getting into an s8300 remotely via PPP. Once in I can login in via telnet and type 'sat'. All is fine all the way to the command line interface as all definity's. Once I am there I can type change station 1234, or change hunt group etc....

But how can I go to the next page or use the F(keys) to move from page to page. I can make changes on the first page, but can't hit F(keys) to go to the second, third page etc.

 

[eclemente]

maybe you can try using 4410 as terminal emulation.

Edgar Clemente

 

[seezer]

If you're using telnet from a DOS box, you'll have to choose terminal type W2KTT once you successfully authenticate after the dsat command. The W2KTT terminal type uses escape key sequences for navigation and command completion.

If you're using ASA, you can choose 4410 emulation as noted by eclemente.

Seezer

 

[nknook]

Using W2KTT terminal type (when using a DOS window instead of Avaya Terminal Emulator):

ESC n - Next page
ESC p - Previous page
ESC e - Enter (F3)
ESC x - Cancel

 

[Vmail]

Thank You.