Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RSP7000/AIP gives SNMP-3-BADOID error

Status
Not open for further replies.
nelsonherron

nelsonherron

Technical User
Jan 15, 2003
4
US
I have a 7010/RSP7000 (no CI) that runs fine except for the ATM card. When I plug in the MM cable from the switch I get a "SNMP-3-BADOID: ATTEMPT TO GENERATE AN INVALID OBJECT IDENTIFIER" message with a TRACEBACK string. It is running 12.1.18 boot and 12.2.7 IOS, 128 MB mem. I have two cards that give this error. The 7010 sh cont cbus lists it as HWr 1.03. I have a 7000 running 11.2.15 from ROM and both cards work fine. The sh cont cbus lists the cards properly as v. 1.30. Any suggestions?
 
Status
Not open for further replies.

Similar threads

Hayden09
  • Locked
  • Question
Cisco Sg-300 Flapping?
Replies
0
Views
581
Hayden09
Hayden09
dogg1
  • Locked
  • Question
CUCM SNMP Set Command
Replies
1
Views
579
whykap
whykap
Zero6
  • Locked
  • Question
question about cisco cbs 350-12xs 12 port 10g sfp+
Replies
0
Views
402
Zero6
Zero6
NavinNet
  • Locked
  • Question
Why 2 different mac addresses of a server are being shown of CISCO 6509E Layer-3 Switch ?
Replies
0
Views
242
NavinNet
NavinNet
acabezas2014
  • Locked
  • Question
Need to create QoS for SNMP and Radius traffic on Cisco 4948 Switches
Replies
0
Views
264
acabezas2014
acabezas2014

Part and Inventory Search

Sponsor

Back
Top