We have a 3Com Superstack 3 3300 that does not have a layer 3 module. We need to route between two subnets connected to this switch. We also have a Cisco 2610 router that can do 802.1q encapsulation. Can I use 802.1q/VLANS and the 2610 to get packets routing between the two subnets and if so how or do I just have to purchase the layer 3 module for the switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
routing using 802.1q
- Thread starter dlalonde
- Start date