Routing question

[boymarty24]

Hi Guys,

After a couple of years doin checkpoint i am back with cisco. I have a question with routing.

I have a routed network behind my inside interface of the ASA. Is it possible to use the asa as deafult gateway to route the traffic to my inside router? I know this was not possible on version 6 and on version 7 it was only avaible for ipsec connection to route on a stick.

But i read somewhere that its possible these days. Can´t get it to work though.

 

[Supergrrover]

It is the intra-interface command. You want this -

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080734db7.shtml

Hope it gets you going.


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[boymarty24]

I Brent!

I am running version 8.03 and the intra command is activated. I do think its a problem with my NAT. The log shows that it cant find any PAT rule, can´t figure out the syntax for that though.

Any suggestions?

 

[boymarty24]

Hi,

Sorry but it works. I hade an nat rule messing with my configuration.

Marty

 

[Supergrrover]

Nats are so annoying. Welcome back to the world of cisco.


Brent
Systems Engineer / Consultant
CCNP, CCSP