Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Routing Multiple networks to use one PPPOE connection

Status
Not open for further replies.

izatech

IS-IT--Management
Oct 27, 2005
11
0
0
CA
Hi All,

Have a bit of a situation here I am hoping you can help me out with.

Here is the layout.

Network A> 192.168.2.0 (Office Net)
Connected to office net, Office PC, and Wireless AP

Internet access via Bell 2701HG-G configured as a modem only
(wireless and all security turned off) PPPOE auth done with a
Hawking H2BR4 Dual wan 4prt router.

Network B> 192.168.1.0 (cam net)
Connected to cam net, Security servers, IP cameras.
Router linksys befsr41.

Requirement
Network A> full time access to Internet w/ no need for access to network B.
Network B> needs access to network A's internet connection.

I need suggestions on how to make this work, other than getting a layer 3 managed switch or a second PPPOE connection.

I'm not sure It can be done with this equipment but I need to ask.

Appreciate anybodies help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top