Rolling out one-x Portal on R9 system

[dphoneguy24]

Have 1 - IP500v2 control unit with LAN 1 on VoIP VLAN and LAN 2 on DATA VLAN

Windows Server 2008 R2 is hosting the Voicemail PRO and the Server itself has 2 NICS - one on the VoIP VLAN and one on the DATA VLAN

2 - remote IP500v2 units connected to central site over branch office VPN - VoIP VLAN

Will be spinning up a virtual server on Linux for one-X Portal - which VLAN should it be connected to?

 

[tlpeter]

I would install it on the vmpro server.
Problem solved.

BAZINGA!

I'm not insane, my mother had me tested!

 

[nnaarrnn]

why the heck do you have each of these on two LANs?

If your routing is setup properly, you don't need two LANs. The DATA VLAN can just talk to the Voice VLAN, and vice-versa.

I too would just throw it on the VMPRO server.