Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RLS 7 CP/MGS 2

Status
Not open for further replies.
GENISE

GENISE

Vendor
Joined
Jan 31, 2011
Messages
1
Location
US
I CANT GET THE MGS PORTION OF THE CARD TO REG, IT SAYS WRONG IPMG TYPE?
 
Sort by date Sort by votes
You need to configure the MG-type as follow:

CPMG: Type MGS
 
Upvote 0 Downvote
If you have upgraded from old release PBX data base then


REQ chg
TYPE supl
SUPL 0
SLOT
SUPT
IPR0
IPR0_TYPE MGS
ZONE0
IPR1
ZONE1
DES1
-CE
-1E
-E
-CT
-2T
-T
WRAP UP SUPL 000 ..OK
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Trason
  • Locked
  • Question Question
e911 on rls 7 where to start
Replies
2
Views
789
bignose21
bignose21
HollTel
  • Locked
  • Question Question
TTY not working on a CS1K Rls. 7.0
Replies
2
Views
747
HollTel
HollTel
HollTel
  • Locked
  • Question Question
TTY - PMS connection not working - Nortel CS1000 Rls 7.0
2
Replies
29
Views
4K
MossEng
MossEng
nihaalrai236
  • Locked
  • Question Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
1K
Firebird Scrambler
Firebird Scrambler
LittleMaster
  • Locked
  • Question Question
Cs1000 Rls 4.5 patches needed
Replies
3
Views
547
LittleMaster
LittleMaster

Part and Inventory Search

Sponsor

Back
Top