Ringing issue

[AWSMALIK]

When I call from extension no.5301 to 5302 in my MD110,pulse dialing is listened. But no ringing at extension no.5302.What may be the cause? Please help

 

[TioDu62]

Why using Pulse Dialing? This is for very old analogue phones. Maybe your system is set to use Swedish pulse Dialing method.

 

[TioDu62]

Check if the status of the called extension with command SUSIP, maybe has follow me activated. Or just in case dial #001# on it. This procedure is the general cancelation, it will clear any active feature.

 

[AWSMALIK]

When I call from extension no.5301 to 5302 in my MD110,pulse dialing is listened. But no ringing at extension no.5302.What may be the cause? Please help

Why using Pulse Dialing? This is for very old analogue phones. Maybe your system is set to use Swedish pulse Dialing method.

How can I change from pulse dialing to tone(DTMF)dialing?

 

[TioDu62]

It depends on the telephne set. Not the system. The Analogue extension board accepts both method of dialing.
Check if the telephone has a kind of switch to change fom pulse to dtmf.