Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ring Down Circuits
- Thread starter ctr999
- Start date
The specifics of the application would be useful. For instance, I connected 4 'Ring Down' circuits from a customers parking lot to their security department. These were actually 4 analog phones with the Hotline programmed as the security departments extension number. The only additional need was 4 'dry' circuits from SBC (It was cheaper then getting permits and rights-of-way to install private wiring).
If your circuit is from a different source, say from a different town or out of state, you should be able to assign it as a regular loop start trunk. Have you checked the circuit at the D-mark with a butt set and multi-meter to verify proper operation?
If your circuit is from a different source, say from a different town or out of state, you should be able to assign it as a regular loop start trunk. Have you checked the circuit at the D-mark with a butt set and multi-meter to verify proper operation?
- Status
Similar threads
