Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
RFC asp
- Thread starter plsh
- Start date
Hi there i Have an example from vba.
this should be basically the same.
you can find this example all over the web.
Use the keyword: RFC_READ_TABLE
Some years ago i tried this too, but in the process i ran a against some kind of wall. cannot really remember what it was . so be cautios ...
if you need further assistance, i will happily provide it
best regards,
palor
this should be basically the same.
you can find this example all over the web.
Use the keyword: RFC_READ_TABLE
Some years ago i tried this too, but in the process i ran a against some kind of wall. cannot really remember what it was . so be cautios ...
if you need further assistance, i will happily provide it
best regards,
palor
- Status
Similar threads
