Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rewrite destination address

Status
Not open for further replies.
bertieuk

bertieuk

IS-IT--Management
Joined
Jun 1, 2004
Messages
175
I have a cisco 3660 routing a number of dial-up users.

I want the users to only use one DNS server attached to the same router on a VLAN.

I therefore need to re-write the destination address based on an input destination of port 53.

Can this be done?

Thanks Si
 
Status
Not open for further replies.

Similar threads

NavinNet
  • Locked
  • Question Question
Why 2 different mac addresses of a server are being shown of CISCO 6509E Layer-3 Switch ?
Replies
0
Views
277
NavinNet
NavinNet
brownmab53
  • Locked
  • Question Question
Cisco PIX 525 is not allowing DHCP address to be applied to router
Replies
1
Views
296
iggsterman
iggsterman
flopeedo
  • Locked
  • Question Question
Allow outbound 443 to public IP Address
Replies
0
Views
184
flopeedo
flopeedo
RyreInc
  • Locked
  • Question Question
hide IP address from network
Replies
6
Views
536
VinceWhirlwind
VinceWhirlwind
force5
  • Locked
  • Question Question
Nexus 7K DHCP Snoop errors after adding 2nd dhcp relay address
Replies
0
Views
311
force5
force5

Part and Inventory Search

Sponsor

Back
Top