Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

restore of flash announcement

Status
Not open for further replies.

telcoguy

MIS
Dec 5, 2001
514
NL
Got the following issue;
on a Definity SI rel 9.5, backups of the announcements were made from several TN750C's to several flash cards.
I'd like to restore one, but is there a way to find out which of the boards were backed up to which flash cards?
By using the "sta card-mem" I can find out that there are announcements on the cards, just not which board they came from or announcement numbers.
any ideas?

Rob
 
If I understand you correctly, could you use the command <disp ann> and then look at the port it references? Then you would see the cabinet and card number the announcement is associated to and then just look at that card to see which Flash is in it.

I hope I am correct, let me know cause I use VAL. Thanks.

Pierre

Avaya, Octel, AUDIX, CMS and other fun stuff.

&quot;There is always a way, it may not be pretty but there is always a way.&quot;

&quot;I don't have a technical solution to your management problem.&quot; <PeaveyPhones>

P:-D
 
FixerOfPhones;Sorry what I meant was the system flash card, not the flash on the TN750C..
The disp announcement works on the TN750's not on the system-backup card.


Rob
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top