parkerbrown
Instructor
Is it poss. to do this, as you would in Illy by holding option shift when rescaling?
this is driving me nuts!
this is driving me nuts!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rescale objects while retaining central orientation?
- Thread starter parkerbrown
- Start date
- Status
hi,
there is no short key, but you can do it with the option bar at the top.
Select your frame, see that at the left of your option bar, you have the center point selected, than go the percentage part fill in a percentage et voilà.
I don't like to work with the option bar, but sometimes you have to
carlow
there is no short key, but you can do it with the option bar at the top.
Select your frame, see that at the left of your option bar, you have the center point selected, than go the percentage part fill in a percentage et voilà.
I don't like to work with the option bar, but sometimes you have to
carlow
- Thread starter
- #3
parkerbrown
Instructor
Yeah, I know about that way Carlow, but thanks for the tip anyway.
You'd think it'd work the same way as illy though, wouldn't you?
You'd think it'd work the same way as illy though, wouldn't you?
- Status
Similar threads