Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reporting on APS activity 1
- Thread starter NickBrown
- Start date
In a word NO but ......
You may be able to do something with the SDK.
Or
Previously I have written a query against the CINFO database looking for rows in the RunTimeImage table that have a strat date/time but no end date/time.
It works but is not perfect.
You may be able to do something with the SDK.
Or
Previously I have written a query against the CINFO database looking for rows in the RunTimeImage table that have a strat date/time but no end date/time.
It works but is not perfect.
-
1
- #3
OldSkoolSkater
MIS
Hi Nick
If you run the Seagate setup again and check the box for the info monitor snap-in, this gives you the ability to see what you want.
I find it very helpful as it tells you all job statuses, who is logged in, and using what Seagate product processes.
You will need the Microsoft Management Console (MMC) on your machine, and you add the snap-in by going to Console/add or remove snap-ins.
It can be a little inaccurate but on the whole is quite good!
Cheers
Steve
If you run the Seagate setup again and check the box for the info monitor snap-in, this gives you the ability to see what you want.
I find it very helpful as it tells you all job statuses, who is logged in, and using what Seagate product processes.
You will need the Microsoft Management Console (MMC) on your machine, and you add the snap-in by going to Console/add or remove snap-ins.
It can be a little inaccurate but on the whole is quite good!
Cheers
Steve
- Status
Similar threads
- Locked
- Question