Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Replacing failed HDD on Logical Drive 1
- Thread starter kurio71
- Start date
-
1
- #2
rclarke250
Technical User
pretty much, pull the drive, wait one minute,install new drive, and in a minute or so it should go from slow blink, to all the drives in the array blinking as it rebuilds, this can be monitored on the serveraid manager software. If rebuild doesn't start in a few minutes, scan the drives again in serveraid manager,and then add the drive to the array as a global hot spare, and it should kick off a rebuild.
- Status