Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

replacing defective 412-help

Status
Not open for further replies.
RITEL

RITEL

Vendor
Joined
Dec 29, 2007
Messages
88
Location
US
Tonight we are replacing a bad IPO 412 that was on 5.0 with a brand new unit that is coming up as 3.2.

Can we just use the backup from the defective 5.0 412 and upload it to the new 3.2 412? or are there intermediate steps we must take?
Thanks.

 
Sort by date Sort by votes
just upgrade

If it ain't dutch it ain't much
 
Upvote 0 Downvote
Indeed, upgrade and put the config back in.
The 412 has no extension ports so there is nothing that can go wrong.


BAZINGA!

I'm not insane, my mother had me tested!

 
Upvote 0 Downvote
a 412 can simply be taken to rel5 (6.1 if you really want at a cost)



ACSS - SME
General Geek



1832163.png
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sheldoom
  • Locked
  • Question Question
IP Office Replacing CM
Replies
5
Views
581
JayNEC
JayNEC
finest
  • Locked
  • Question Question
Replacing the User Portal image - https://<IPO>:7444/userportal/assets/images/login_side_image.png
Replies
4
Views
634
finest
finest
ThePhoneMn
  • Locked
  • Question Question
Replacing Primary on VMware
Replies
2
Views
332
ThePhoneMn
ThePhoneMn
WirSysPlus
  • Locked
  • Question Question
Media Manager help
Replies
5
Views
923
gkittelson
gkittelson
NYSTECH
  • Locked
  • Question Question
IP Office IX Workplace Push notifications help
Replies
4
Views
572
derfloh
derfloh

Part and Inventory Search

Sponsor

Back
Top