Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Replacing AnSL8500 HBK Card
- Thread starter Bounder97
- Start date
Did u managed with the replacing of the HBK card? I never replaced a HBK... only a HBC...
Please see the notes below on replacing a HBK card... I hope it helps... always be caution...
PWA, HBK - Function; Security Key. Provides library
access security, and maintains password control.
CAUTION: Configuration and account information contained in the HBK card is unique to each library. Before installing a new HBK card,verify that it has been configured with the unique information required for your library.
Replacement
Note: Perform the following step only if you are installing a new
HBK card. If you are installing an HBK card that was previously
installed in your library, go to step 4.
3. Configure user accounts and passwords of a new HBK card as if you are
logging onto the library for the first time. Refer to “Activating User Accounts”
in the SL8500 Installation Manual, PN 96138.
Note: Advise the customer that they must reset their passwords.
4. Reinitialize the library and verify successful completion of power-on self test
and audit.
5. Position the cover plate.
BR,
Please see the notes below on replacing a HBK card... I hope it helps... always be caution...
PWA, HBK - Function; Security Key. Provides library
access security, and maintains password control.
CAUTION: Configuration and account information contained in the HBK card is unique to each library. Before installing a new HBK card,verify that it has been configured with the unique information required for your library.
Replacement
Note: Perform the following step only if you are installing a new
HBK card. If you are installing an HBK card that was previously
installed in your library, go to step 4.
3. Configure user accounts and passwords of a new HBK card as if you are
logging onto the library for the first time. Refer to “Activating User Accounts”
in the SL8500 Installation Manual, PN 96138.
Note: Advise the customer that they must reset their passwords.
4. Reinitialize the library and verify successful completion of power-on self test
and audit.
5. Position the cover plate.
BR,
- Status
