Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Repeating incoming call (every 5 secs) after Power failure

Status
Not open for further replies.
May 28, 2003
106
GB
Dear All,

when i came in this morning half our floor was without power, our meridian opt 11 was also down. I changed the power outlet and the system rebooted. All out phones are now back, showning right name and number (but the wrong time) and i could call my mobile and vice versa.

The only problem left is that our central number (9800) is getting a call every 5 seconds from the same number that i cant identify because it only displays 1703-2.

Anyone can help?

With kind regards and many thanks in advance Sebastian
 
Hi
If you receiving the call on the attendant console (M1250/M2250) you must release the call from the incoming (RLS SRC KEY on the 2º column of the console), otherwise you probably have to disablle the TN from line 1703-2 because it got blocked.

J.M.F
 
Dear All,

many thanks for your input the problem is solved.

Kind regards
Sebastian
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top