Removing numbers from a hunt group 1

[merice]

I have an hunt group and need to remove some of the numbers in the group. The ext numbers are not on handset, but are attaced to a remote access server. I am new to PBX administation, and I have no idea what load or what actions to take to edit a hunt group. Thank you.

Marc

 

[zog99]

In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN.
You can get this information by printing the Group Hunt Lists in overlay LD 20.
REQ PRT
TYPE GHT
LSNO (c/r for all the lists or enter the list no)
Check the print out to obtain the correct information.

The changes are made in LD 18.

REQ CHG
TYPE GHT
LSNO (enter the list number which requires changing this is the GHLN from the above print out)
SIZE (c/r)
WRT (c/r)
STOR enter the store number concerned then space then the extentsion (DN) number
STOR XX YYYY for example
WRT (c/r) Yes to update the list.
To remove an entry at the STOR prompt
STOR enter the store number, space(c/r)
STOR XX space bar
WRT (c/r)
Carriage return through to the REQ prompt.

 

[merice]

When trying to get the list no(LSNO) I hit (c/r) to get all the lists on the system. That only returns:

REQ: Prt
TYPE: GHT
LSNO

SCH0443

 

[cpm23]

Print the DN in LD 20. That will give you the TN. Print the TNB in LD 20 and look at the HUNT prompt.
LD 20
REQ: PRT
TYPE: DNB
DN (put in the ext number)
Carriage return through the rest. Note the TN, then:

REQ: PRT
TYPE: TNB
TN: (put in the TN that you got from the printout above)
Carriage return through the rest. Lookat the HUNT prompt. That'll tell you where this port hunts to.

 

[zog99]

that SCH tells you that there are no GHT lists built on your system..

do you use PLDN's for your huntgroup

 

[zog99]

do you mean Group Pick up ????

 

[merice]

Its on number on a remote access server that rolls to other numbers also dedicated to the RAS. I'm trying to find how they are set up.

 

[zog99]

can you print the TN

 

[merice]

>LD 20

PT0000
REQ: Prt
TYPE: DNB
CUST 0
DN 3390
DATE
PAGE
DES

DN 3390
CPND
NAME RAS 1
XPLN 5
DISPLAY_FMT FIRST,LAST
TYPE L500
TN 018 0 00 06 MARP DES MAIN 24 OCT 2003

 

[zog99]

can you print TN 018 0 00 06

 

[merice]

Not sure how to do that.

 

[acewarlock]

REQ PRT
TYPE TNB
TN 18 0 00 06 If this is an Option do 18 6

 

[merice]

>ld 20

PT0000
REQ: prt
TYPE: tnb
TN 18 6
DATE
PAGE
DES

DES MAIN
TN 018 0 00 06
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 3390 0 MARP
CPND
NAME RAS 1
XPLN 5
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 3035
TGAR 5
LDN NO
NCOS 5
SGRP 0
RNPG 0
LNRS 32
XLST
SCI 0
CLS CTD DTN FBD XFA WTA THFD FND HTA ONS
LPR XRD AGRD CWD SWD MWA RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR PHD
DATE 24 OCT 2003


NACT
REQ:

 

[srmega41]

If I can interject, it appears that you have a group of analog lines that roll from one to the next on a Remote Access Server modem bank. In this case, follow the same steps you did above, but change the DN to the number that appears as HUNT; 3035 listed above. You will probably see another display, similar to the last, with a name of RAS 2. This will have the 3035 DN and a new HUNT. Continue this until you have all the numbers in the hunt list, and then you can remove, or OUT, what is no longer required.

If you do that, don't forget to remove the number in the HUNT field of the last entry.

Hope this helps,

Scott M.

 

[merice]

I have them circle in the modem bank I.E 3390 is the main access, it "hunts" to 3035 RAS 3 -> 3036 RAS4 -> 3037 RAS5 -> 3391 RAS6 -> 3038 RAS 7 -> 3042 RAS8 -> 3032 RAS2 -> 3039 RAS3039 -> 3590 SVR2 -> 3390 main access, I need to drop numbers 3037, 3038, 3039, and 3042, and change the hunt number in the ones I keep to close the loop back to the main access number.

 

[acewarlock]

chg hunt on 3036 to 3391
chg hunt on 3391 to 3032
chg hunt on 3032 to 3059

thats it.

what are you doing with the ones your droping, outing them?

 

[merice]

Yeah, i'm going to out them.....what LD do I need to be in?

 

[zog99]

LD 20
req=chg
type = 500
tn x x
echg=yes
item hunt x (if x dosent work try 2 spaces, been a while)

req=end

 

[merice]

I couldn't get it to take:

REQ: chg
TYPE: 500
TN 18 7
ECHG yes
ITEM hunt x
ITEM hunt
ITEM
SCH0349


won't let me end

 

[acewarlock]

You don't want to X them you need to change as I said in my other post.

REQ: chg
TYPE: 500
TN 18 7
ECHG yes
ITEM hunt xxxx new hunt as my post above