Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote PIX to Central PIX

Status
Not open for further replies.

boardoms

Technical User
Dec 16, 2004
5
US
Ok, I am a complete newbie at this and have tried to utilize cisco's website and this forum to get me though this, but i can not seem to get the PIX 501 at out remote office to connect to the main office. Could someone please let me know what I am doing wrong... I am desperate. The remote Pix has a dynamic IP and the main office has a PIX 501 w/ a static IP.

Here is the configuration for the remote PIX

Building configuration...
: Saved
:
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password pqHa2Qj9kMlFWNjw encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname erie
domain-name cisco.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.1.0 Susi_Main
access-list inside_outbound_nat0_acl permit ip 10.1.1.0 255.255.255.0 Susi_Main 255.255.255.0
access-list outside_cryptomap_20 permit ip 10.1.1.0 255.255.255.0 Susi_Main 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 10.1.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location Susi_Main 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit icmp any any
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.1.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto map outside_map 20 ipsec-isakmp
crypto map outside_map 20 match address outside_cryptomap_20
crypto map outside_map 20 set peer 151.201.xxx.xxx
crypto map outside_map 20 set transform-set ESP-DES-MD5
crypto map outside_map interface outside
isakmp enable outside
isakmp key ******** address 151.201.xxx.xxx netmask 255.255.255.255 no-xauth no-config-mode
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 1
isakmp policy 20 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 10.1.1.2-10.1.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:13b4cc2dae101367efc5863cb2ee0038
: end
[OK]


Thanks for your help,
Steve
 
What about the other config, it won't be easy to diagnose since there are no apparent problems in that config.

Jan


Network Systems Engineer
CCNA/CQS/CCSP/Infosec
 
Thanks for taking a look at this... I'm really under the gun here and could use a lot of help. Here is the config for the other PIX


PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password pqHa2Qj9kMlFWNjw encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname hermitage
domain-name susis.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 100 permit ip 192.168.1.0 255.255.255.0 10.1.1.0 255.255.255.0
access-list 100 permit ip 192.168.1.0 255.255.255.0 10.3.3.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 151.201.xxx.xxx 255.255.255.0
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool Erie 10.3.3.1-10.3.3.10
pdm location 10.2.2.0 255.255.255.0 outside
pdm location 10.1.1.0 255.255.255.0 outside
pdm location 10.3.3.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 151.201.xxx.xxx 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set ESP-DES-MD5
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 1
isakmp policy 10 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group Erie accept dialin pptp
vpdn group Erie ppp authentication mschap
vpdn group Erie client configuration address local Erie
vpdn group Erie pptp echo 60
vpdn group Erie client authentication local
vpdn username Erie2 password *********
vpdn username Erie1 password *********
vpdn username Erie3 password *********
vpdn enable outside
dhcpd address 192.168.1.2-192.168.1.33 inside
dhcpd dns 151.201.xxx.xxx 151.201.xxx.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:3738e643f048ef876a10de3bce71b72f
: end
[OK]
 
I have 7 PIX 506s setup in a hub-and-spoke style network. Do you just need to move traffic between the two networks or are you looking to encrypt it with a site to site tunnel?
 
First off I just want to thank everyone on this forum for all there help and advice, on this post and others. I have everything up and working now and it all seems to be running smoothly.


Thanks,
Steve
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top