remote IP phones

[btrain8]

how do you force a reboot of an IP phone this is located remotely? I hear there's another way asided from 'busy'/'release'

 

[SF0751]

Enter 'ip-phones' or 'tti' or 'unauthenticated' or 'all-ip', and
        'ip-network-region(1-250)' or 'all-regions' or
        'ipaddr xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy'

 ip-phones                                 IP phones
 tti                                       TTI IP stations
 unauth                                    Unauthenticated IP stations
 all-ip                                    All IP stations
 ip-network-region (1-250)                 Specific network region
 all-regions                               All network regions
 ipaddr xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy    Specific IP address range, inclusive

 Example: reset ip-stations ip-phones ipaddr 192.168.1.50 192.168.1.100
 Example: reset ip-stations all-ip ip-network-region 10

Susan
"An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you do know and what you don't."
- Anatole France

 

[buckie53]

My sat terminal is froze up how can I fix the problem with out re-booting the switch?