Remote Control 3.8 Install - Disk Clone 1

[blx]

Hi All,
I want to be able to install the Remote Control 3.8 binaries as part of a disk clone process.
The reason for this is that I have a large number of laptops that only dial in that are in the process of being rebuilt, and I don't want the binaries to be downloaded when they first become remotely controlled.
Any suggestions?

Thanks in advance

 

[dietmarp]

Hi,
that shouldn't be a problem at all. Install the Endpoint, distributed RemoteControl.
Before you create the image, make sure to delete the lcf.dat and lcf.id in the LCF_DATDIR and edit the last.cfg file adding the gateway for the Endpoint to log into (lcs.login_interfaces=<GW>)next time the Endpoint starts.
Rgds
Dietmar