REMOTE CONNECTING THROUGH HYPERTERMINAL

[whitel]

Hi Guys,

I've been happily remote connecting (dial up) to one of our CS1000's now for a few months. Using hyperterminal I've simply dialled the race box got on first time and never had a problem. Now I can connect to the race box (modem) but i just don't get a prompt on the screen. I know I'm connected because Ive had a colleague stand in the comms room and tell me he can here the race box making the modem sounds as I dial in, but I can't for love nor money get REQ: (or whatever) to pop up!! the site im connecting to is in newcastle and I'm in kent so can't even drive up the road to have a look.

Anyway thanks for your help. Lee.

 

[StoneColdphoneman]

Could be disabled TTY.

 

[GHTROUT]

The TTY port might be disabled. And that requires someone to enable it from the site.

If there is a terminal in the room, you might be able to walk your colleague through logging in and going LD 37 .STAT TTY

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]

 

[JcBWF]

Have your colleague check your TTY port and make sure the one for the modem is enabled.


Perfection is expected, Excellence is Tolerated