snakeblitsen
Programmer
Hi, I have to power down a 13 lim system BC9 at the weekend. What would be the correct procedure for bringing it back on line? Lim 1 first -- any tips.
Cheers
Cheers
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reload of system
- Thread starter snakeblitsen
- Start date
- Status
TRIDENT100
Technical User
LIM 2- 13 will not start before LIM 1 is up. If possible it is nice to verify that LIM 2 - 13 show 20 or 3120 on LPU display board. Next step is 30- 40- 70- 71 - 8x -90 -91 -92 -99 - 102- 99 - 101 -99 -104 -99 - 114.
Verify that you get Alarm code=40.
Verify that you get Alarm code=40.
- Thread starter
- #3
snakeblitsen
Programmer
Hi sorry, I worded this wrong, I have to restart the system, what would be the procedure of restarting the whole system without powering down ie using the LPU button.
Cheers
Cheers
TRIDENT100
Technical User
RFEXI "clear" up many bugs and do restart, but if you want a reload of the system use:
LALRL:LIM=ALL;
/Trident/
LALRL:LIM=ALL;
/Trident/
- Status
Similar threads
- Locked
- Question