registering a DT570

[lancbomb]

sorry,
brain death.

have a faulty dect to replace

1> how do you register new dect
2> do you need to unregister old one
3> its on a BP, so is it different than from an MD ?

cheer

LB

 

[lancbomb]

have found below,

what is AC ?
again, this is running from a BP

cheers

---------------------

Proceed as follows Result Comment
Press NO key Ericsson and then Searching is displayed
Press arrow key down/right four times Networks is displayed
Press YES Select net is displayed Networks menu is selected
Press arrow key down/right two times Edit list is displayed
Press YES 1 is displayed Subscribe menu is selected
Press YES Add net is displayed
Press YES Enter name is displayed Here the name of the network can be entered e.g. net1
Enter name and press YES Enter PARK is displayed
Press YES Enter AC is displayed Here the same value as in the AUTKEY parameter in CXAKI command shall be entered
Press YES Please wait is displayed

Add net done is displayed
Wait Network name and directory number are displayed

 

[lancbomb]

any ideas ?

cheers

LB

 

[etompau]

AC stands for "Authentication code".
This code (four digits) you will get from the BMS or CSM.

 

[lancbomb]

cheers etompau,

I got some help from a buddy when I got to site,

cheers for the reply

LB