Register a DID for the conference bridge

[Hescobar]

The SV8300 has a conference bridge, I need to assign number to it.

 

[belevedere]

32 party meet me conference on the CPU; CMD's
0401>11> 0 = 4, 8 party CNF, 2 = 2, 16 party CNF, 3 = 1, 32 party CNF
11>XXXX>valid extension number, CMD 11 = virtual extensions, the CNF uses one as a pilot number.
1269>XXXX (chosen pilot number from CMD 11) > 1 = meet-me cnf
410>141 - default is 7 hours for cnf forced disconnect.

 

[Hescobar]

thank you instructor, here is more information.
the system has 3 conf. bridges, 1 is properly programmed (I cant find the lead DID in CMD 11) I've programmed the second by taking a DID from CMD 11 and point it to the lead number of the PVA group; (and put this group in a hunt group.

the third one appears to be disabled.

is there a benefit by hiding the DID in CM11 (other than it cant be logged in in to a phone); also the Polycom DIDs are hidden.

thank you for your time and knowledge.

here is what I see COMMAND=0401
0401>11
0401>11:3-
COMMAND=1269
1269>1000
1269>1000:
DATA NOT FOUND
(1000 this is conf. 1 number)

hescobar

 

[belevedere]

(1269>1000: DATA NOT FOUND)

This means that VE ext 1000 does not exist. Try assigning it in CMD 11