Good morning, John!
Whit your help I've found something rather interesting:
dipas_batch
********* RMX : LOGON at 2007/03/16 10:44:30 ONLINE BATCHPROCESSING ********
*** HICOM-Nr: RMX Contract: 00 Name:
*** CMX:200 -200 (CMX 0) disconnected by famos (blocked?)
*** HICOM-Nr: RMX Contract: Name:
#
(It's identical to the message in software_activation file, I couldn't get RMX.)
procadmin -l -g mpcid
mpcilog Active Wed Mar 14 17:44:29 2007 mpcid 2124
mpcid Active Wed Mar 14 17:44:31 2007 mpcid 2141
#
(It looks OK)
Then I looked at the next docoment:
"Siemens COM Enterprise Systems
HiPath4000 A&S V2.0 Primergy Manager CV322
HiPath4000 A&S V2.0 Primergy HTS 6.2 CV322
Release Note"
It says:
8.1.2 MPCID: FAMOS1, CPTP and FTRNS Restrictions
2. Restrictions concerning CPTP- and FTCSM-entries for Filetransfer between UW7 and RMX:
MPCID creates CPTP- and FTCSM-entries during startup for initialization of the Filetransfer between
UW7 and RMX:
CHANGE-FUNCT:SLANG=ENG;
ADD-CPTP
PCON,,"DVANCC01",127.0.0.1;
ADD-CPTP:APPL,,"FILETRAN","DVANCC01","FT0",YES,102,102,"FT-HIC","$FJAM";
ADD-CPTP:APPL,,"FILETRAN","DVANCC01","FT1",YES,102,102,"FT-HIC","$FJAM001";
ADD-CPTP:APPL,,"FILETRAN","DVANCC01","FT2",YES,102,102,"FT-HIC","$FJAM002";
ADD-FTCSM:A1,STATE,RUN;
ADD-FTCSM:A1,NCF,1,"FTPS.NO", "X","X","0",OTHER;
The CPTP-entries cannot be created, if one or more entries with EMS-Application Name "DVANCC01"
already exist.
If so, all entries have to be created manually but, instead of "DVANCC01", with another EMS-Application
Name like "DVANCC02".
Then I did:
DISPLAY-CPTP:;
H500: AMO CPTP STARTED
DP-CONNECTION :
+-------+----------+-----------------+
| DP NO | DPPROC | IP NUMBER |
+-------+----------+-----------------+
| 1 | CCMSCSRV | 192.0.2.5 |
+-------+----------+-----------------+
| 2 | CCMSDBSY | 192.0.2.5 |
+-------+----------+-----------------+
| 3 | APPLPROC | 192.0.2.5 |
+-------+----------+-----------------+
| 4 | CMADP | 192.0.2.3 |
+-------+----------+-----------------+
| 5 | DVANCC01 | 192.0.2.3 |
+-------+----------+-----------------+
| 93 | HU_INTER | 192.0.2.5 |
+-------+----------+-----------------+
| 16 | FILETRAN | DVANCC01 | FT0 | YES |102 |102 |FT-HIC |$FJAM |
+-----+----------+----------+----------+-----+----+-----+----------+----------+
| 17 | FILETRAN | DVANCC01 | FT1 | YES |102 |102 |FT-HIC |$FJAM001 |
+-----+----------+----------+----------+-----+----+-----+----------+----------+
| 18 | FILETRAN | DVANCC01 | FT2 | YES |102 |102 |FT-HIC |$FJAM002 |
+-----+----------+----------+----------+-----+----+-----+----------+----------+
| 19 | FILETRAN | DVANCC01 | FT3 | YES |102 |102 |FT-HIC |$FJAM003 |
+-----+----------+----------+----------+-----+----+-----+----------+----------+
| 20 | FILETRAN | DVANCC01 | FT4 | YES |102 |102 |FT-HIC |$FJAM004 |
Thete are not such a field like "DVANCC01",127.0.0.1!
Since there is alredy exist "DVANCC01, 192.0.2.3", should I create it manually according to the instruction above?
Many thanks for your trying to help me! It's very kind of you! I realize fully that it's very dificult to do this without looking!
Because the rules of this forum ban using any addresses I'll try to type it in a secret form
murzintsev_donstroy_com (the first underscore means @ and the second one means . "point").
Happy St. Patrick's Day!
DS: (074 No Y-APS found on