Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reclaim Issue

Status
Not open for further replies.

svb71

Technical User
Joined
May 8, 2012
Messages
1
Location
NL
My company is still using LTO2 and LTO3 tapes with 4 LTO2 drives and 4 LTO3 drives.

When the reclaim starts the four LTO2 drives are starting the reclaim ( 2 sessions ). The LTO3 reclaim is only running in 1 session. The other two LTO3 drives are idle.

How can I check why the drives are not able to start a reclaim session? Or do I need to add the two drives to a special group?

TIA
 
Hi There,

If you look at your lto3 storage pool, you may see that you only allow 1 reclaim process to check this do a "q stg <your lto3 tape pool> f=d" and look for "Reclamation Processes: 1" . Try changing that to 2 buy running "upd stgpool <your lto3 tape pool> reclaimp=2" then kick off your reclamation again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top