Reach line card unable to program more than 16 Digital phones

[shroud]

Attempted to program new digital phone on 17th TN port, however receiving error

 

[shroud]

The reach line card is installed in a Nortel Option 81C pabx and connected to a 9150 Remote Office and is a 32 port NTDR70BE card. Does it mean the 17th circuit will need to be programmed on the next card slot : Currently Digital TNS; 0 to 15 programmed on RLC TN 12 0 10, does the 17th digital phone need to be programmed on TN 12 0 11 0 ?

 

[janaya]

There is an option in the CLS that opens up channels 17-31.

https://downloads.avaya.com/css/P8/documents/100125103

Check page 114

Hope this helps.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/

 

[shroud]

Thank you John, I have programmed the new digital phone extension on the 17th port, but just wondering is there a way to have a different model phone configured as I had to programme the phone type to be the same as the 1st port phone. I have informed our customer to install the phone on port 17 and am waiting the outcome. Thanks again

 

[KCFLHRC]

Yes, The 17th port will be Unit 0 on the next card slot

 

[shroud]

Hi KCFLHRC, Thanks for that, I will programm the phone in the next card slot and see what happens